en.plazmapak.ru

Feedback

Sitemap

191015, Russia, Saint Petersburg, Shpalernaya st., 52. Array

Micro grinders

Dosing machines

Wrapping machines

Homepage ->  Products ->  Wrapping machines ->  Wrapping semiautomatic machine «Plazma 10U-3»

Wrapping semiautomatic machine «Plazma 10U-3»

Wrapping machine «Plazma 10U-3» consists of:

• the body;
• rollers for feeding and railing the film;
• feed hopper;
• shaper (collar);
• frame with the heating elements;
• handle;
• block for controlling the package length;
• electronic control unit.

Specifications:

• output, package/min – up to 20;
• package width, mm – 75, 90, 120, 140, 165, 180, 210;
• package length, mm – 40-340;
• installer power, kW – 0,75;
• supply voltage, V - 3 x380;
• overall dimension, mm 800х950х180;
• weight, kg – 100.

The working process consists of formation of the pipe from film, soldering horizontal and vertical seams and cutting finished package off. Before start to work one needs to set the temperature of the horizontal and vertical heating elements with the help of heat-control unit which is located on the side panel of the wrapping machine.

In order to ensure the temperature setup is correct one needs to do several control seams.

The working process of the wrapping machine «Plazma 10U-3» consists of the following operations: manipulator should pull film out to limiter, solder the seams with the help of the handle (soldering time should be about one second) and then return the handle to the initial position.